Studies on Three—electrode Semiconductor Lasers

Using the ray trace method,three-section semiconductor lasers are studied .An analytic expression of output power for the three-section semiconductor lasers is derived for the first time.Frome this expression,threshold condition is also obtained.     

Iron pyrite films prepared by sulfur vapor transport

Iron films deposited via thermal evaporation, with a thickness between 100 and 250 nm, were converted into FeS₂ by open sulfur transport using nitrogen as a gas vector. The films thus obtained constituted a single pyrite phase and were optically highly absorbing. The sulfurization process was optimized. As a result, sample temperature and conversion time were found to be the major determining parameters. The films were characterized using several methods. The crystallinity and phase identification were determined by X-ray diffractometry. Scanning electron microscopy showed a homogeneous surface of both iron and pyrite layers. Optical transmission measurements confirmed the highly absorbing character of FeS₂ and allowed the determination of direct (1.35 eV) and indirect (0.82 eV) transitions.     

被动锁模复合环形腔掺饵光纤激光器的自启动分析

本文对被动锁模复合环形腔掺饵光纤激光器的自启动工作特性进行了分析，指出谐振腔内残余反射面的存在是阻碍激光器实现自启动锁模的主要原因。利用半导体激光器有源区的折射率随注入电流的变化而改变的特性，在谐振腔中获得了一个可移动腔镜，克服了腔内残余反射面的影响，实现了锁模的自启动。     

双旋Y切石英振子厚度模式的频温特性的研究

本文利用描述固体中弹性声波的克里斯托费尔方程,建立了双旋Y切石英振子厚度模式的频温特性分析方法,并编制了相应的计算机程序。该程序可给出双旋Y切石英振子在任意切角(ф_3ф_1)下的厚度模(a、b、c模)的频率温度特性曲线。文中给出了单旋AT切、BT切(b模)、双旋SC切(b、c模)、FC切、IT切、LC切、NL_1切、NL_2切、AK切等各已知切型的频温特性曲线。对石英谐振器的切角灵敏度和切角误差进行了分析。     

基于HOP的可调光编码／解码器的研究

提出了一种基于全息光处理器的可调光编码/解码器的实现方案。全息光处理器可以在空间进行编/解码，每个通信网络单元可以采用任意速率的数字或模拟的调制信号，它非常适合于多媒体的通信网络环境，通过对全息光处理器的折射率大小和位置的控制，当一个输入光脉冲经过光处理器中具有特定折射率的空间位置后，便可在处理器的输出端口得到合适的输出信号。本文给出了这种基于全息光处理器的可调光编码/解码器的仿真实验，结果是可行的，与以前文献中提出的结构相比，减小了硬件实现的复杂性，降低了成本和功耗，便于集成。     

继续引领光的方向

光通信仍将在未来电信竞争中扮演制高点的角色。运营商建设光网络首先应充分利用光层的技术，提高系统容量，降低系统成本；其次应提供多业务接入平台；最后发展智能光传输网络，增强网络适应能力。北电网络具有优势的城域网络技术集中在三大领域，即城域DWDM、多业务提供平台（MSPP）和弹性分组环（RPR）；北电网络OPTera城域系列产品正是在上述技术优势支撑下的产品。     

论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。     

Neutral poly(3,4-ethylenedioxythiophene-2,5-diyl)s: preparation by organometallic polycondensation and their unique p-doping behavior

Neutral and non-doped poly(3,4-ethylenedioxythiophene), PEDOTh(Ni), and its hexyl derivative, PEDOTh-C₆(Ni), have been prepared by organometallic dehalogenation polycondensation of 2,5-dichloro-3,4-ethylenedioxythiophene and its hexyl derivative with a zerovalent nickel complex. PEDOTh-C₆(Ni) was soluble in organic solvents and ¹H NMR data indicated that it had an M_n of 11,000. MALDI-TOF mass analysis of PEDOTh(Ni) gave M_n and M_w of about 1700 and 2400, respectively. PEDOTh-C₆(Ni) showed a UV-Vis absorption peak at 546 nm in CHCl₃. Electrochemical oxidation of PEDOTh-C₆(Ni) started at about −0.40 V vs Ag⁺/Ag and gave a peak at 0.20 V vs Ag⁺/Ag. Chemical and electrochemical oxidation (or p-doping) of PEDOTh-C₆(Ni), both in solutions and in a solid state, led to weakening of the original π-π^∗ peaks and rise of new peak(s) in a region of 800-1500 nm. The p-doping of PEDOTh-C₆(Ni) caused not only a decrease in the intensity of ¹H NMR signals of the bridging ethylene hydrogens but also a decrease in that of the hexyl side chain, suggesting a strong interaction of the p-dopant with the side chain. NMR data of poly(3-methoxythiophene-2,5-diyl) also supported an assumption that p-doping brings about a severe change in electronic state of the substituent attached to the polythiophene main chain. PEDOTh(Ni) had a density of 1.71 g cm⁻³; the molecular packing mode of PEDOTh(Ni) is discussed based on the density of the polymer and its XRD data.     

4×622Mb／sWDM40km光通信系统实验

本文完成了我国第一个４×６２２Ｍｂ／ｓ波分复用（ＷＤＭ）光通信系统实验，使单根光纤线路通信容量达２．４Ｇｂ／ｓ。该系统以ＤＦＢ－ＬＤ为光源，工作波长在１．５５μｍ附近，ＬＤ的工作频率稳定度优于±１５０ＭＨｚ，信道间隔２ｎｍ左右，无中继传输距离为４３．６ｋｍ，采用Ｆ－Ｐ调谐光滤波器作为解复用器，接收机灵敏度达－３０ｄＢｍ。     

光纤的淬冷增强原理

本文从拉丝工艺技术的角度出发，讨论了高速、高温拉丝工艺方法对光纤的淬冷增强原理。